1324-2008 16 9/5/08 10:56 AM Page 1324 Interface Products and Surge Protection SUBCON Varioface Series Interface Converters RoHS Interface Isolator -- RS-232/RS232 RoHS 2761499 PHOENIX CONTACT's SUBCON product provides a means to make D-SUB cable assemblies without the hassle of soldering or crimping. The SUBCON product provides connection from the pins of a D-SUB connector to individual screw actuated terminal blocks all in a D-SUB clamshell housing. This means that the only tool required to configure a cable is a screwdriver. Benefits: EMI/RFI Shielded (Ideal for Sensitive Communication Signals) Secure Connection of Cable Assembly to Mating Receptacle Secure Connection of SUBCON to Cable Easy Means to Construct Cable Assemblies; No More Soldering or Crimping; Wide Range of Product to Suit Common Applications Features: Metallized Housing Integral Jack Screws Integral Strain Relief D-SUB to MKDSC 1.5 Terminal Blocks 9/25 Pin Male or Female Versions Max. Cable Diameter: 10 mm; AWG 26-14 Mfr.'s Type 909-0044 909-0045 909-0448 909-0449 909-0450 909-0451 909-0046 909-0047 909-0452 909-0453 909-0454 2761499 2761509 2761596 2761606 5604603 5604602 2761619 2761622 2300986 2300973 2708232 Phoenix No. SUBCON 9/F-SH SUBCON 9/M-SH SUBCON 15/F-SH SUBCON 15/M-SH SUBCON 15 HD/F-SH SUBCON 15HD/M-SH SUBCON 25/F-SH SUBCON 25/M-SH SUBCON 37/F-SH SUBCON 37/M-SH SUBCON-PLUS-PROFIB/SC2 909-0455 2708245 SUBCON-PLUS-PROFIB/PGSC2 909-0456 2744380 SUBCON-PLUS-PROFIB/AX/SC Description EACH Socket, 9-Position Pin, 9-Position Socket, 15-Position Pin, 15-Position Socket, 15-Position -- High-Density Pin, 15-Position -- High-Density Socket, 25-Position Pin, 25-Position Socket, 37-Position Pin, 37-Position Profibus Connector, up to 12 Mbps, Angled Version, Integrated terminating Resistor that connected externally Same as above but with additional PG SUB-D Female Connector for the Connection of Programming Device Profibus Connector, up to 12 Mbps, Axial Version, Integrated terminating Resistor that connected externally 46.08 46.08 39.77 39.77 43.87 43.87 51.68 47.70 60.17 60.17 36.35 41.93 36.35 Stock No. Mfr.'s Type Phoenix No. Description EACH 909-0041 2744461 PSM-ME-RS 232/RS232-P Converter; Rail; Serial 305.91 Interface Converter -- RS232/RS485 The RS-485 standard is used when more than two participants have to communicate. Converting the point-to-point interface, RS-232 to the bus-capable RS-485 standard makes it possible to network up to 32 terminals via a 2- or 4-wire line. ONLINE DATASHEET Stock No. The RS-232 interface is an asymmetrical voltage interface (common signal earth for all signals). In addition to a very low signal output, the interface is characterized by the signal earth being connected to the ground chassis housing. The consequence is very low interference resistance and a range of a maximum of 15 m. A considerable increase in the interference-resistance in industrial applications can be achieved by the use of RS-232 isolator modules. The high-grade 3way isolation between both interface sides, supply and ground potentials provide a floating and interference-resistant RS232 interface. The positive side-effect: The expensive terminal equipment is also protected from damage by this decoupling. The Following Tasks Can Be Solved with this Converter: Coupling an RS-232 Master Interface to an RS-485 Bus System Integrating an RS-232 Terminal in an RS-485 Bus System Networking of Up to 32 RS-232 Interfaces Via the RS-485 Standard (Provided They Can Be Addressed) Setting Up a Temporary Programming and Parameterizing Link Between PC and PLC or Drive Regulators, for Example, with an RS-485 Connection 2744416 Stock No. Mfr.'s Type Phoenix No. Description EACH 909-0039 2744416 PSM-ME-RS 232/RS485-P Control Cabinet Interface Module, 22.5 mm Housing 305.91 Complete offering of surge protection for Remote Sites, Service Entrance, Sub Panels and Cabinet Controls. ONLINE Remote Site Surge Protection INDUSTRIAL CONTROL Locations away from main facilities exposed to large surge currents such as lightening strikes. Available in NEMA 4 indoor/outdoor enclosure and stainless steel for corrosive environments. Includes remote monitoring and lights. Stock No. Mfr.'s Type Phoenix No. Description EACH 909-0185 909-0194 909-0189 909-0198 909-0186 909-0195 909-0187 909-0196 5602201 5602746 5603420 5603421 5602202 5602747 5603416 5603417 SYS N4/I FT+CT-VAL 480/277 SYS N4X/I FT+CT-VAL 480/277 SYS N4/I FT+CT-VAL 480 DELTA SYS N4X/I FT+CT-VAL 480 DELTA SYS N4/I FT+CT-VAL 208/120 SYS N4X/I FT+CT-VAL 208/120 SYS N4/I FT+CT-VAL 240/120 SYS N4X/I FT+CT-VAL 240/120 Surge Protection for 480/244 VAC 3-Phase Surge Protection for 480/244 VAC 3-Phase-Stainless Steel Surge Protection for 480 VAC 3-Phase Underground Delta Surge Protection for 480 VAC 3-Phase Underground Delta-Stainless Steel Surge Protection for 208/120 VAC 3-Phase Surge Protection for 208/120 VAC 3-Phase-Stainless Steel Surge Protection for 240/120 VAC Split Single-Phase Surge Protection for 240/120 VAC Split Single-Phase-Stainless Steel 3058.21 3639.77 3059.09 3639.77 3059.09 3639.77 2353.66 2675.78 5602201 Service Entrance Surge Protection Blocks surges entering the facility from the feed from the utility. Exposed to large surge line follow currents. Includes surge counter, audible alarm and remote monitoring. Stock No. Mfr.'s Type Phoenix No. Description EACH 909-0631 909-0632 909-0633 909-0634 2804092 2804160 2803933 2804047 VAL-SQ SE 200-277/480Y/FM VAL-SQ SE 200-480D/FM VAL-SQ SE 200-120/208Y/FM VAL-SQ SE 200-120/240S/FM Surge Protection for 277/480 VAC Wye, 3-Phase Surge Protection for 480 VAC Delta, 3-Phase Surge Protection for 120/208 VAC Wye, 3-Phase Surge Protection for 120/240 VAC, Split-Phase 2800.00 2800.00 2800.00 2800.00 2804092 Sub Panel Surge Protection Internally generated surges, such as those from motors, drives, and compressors are prevented from traveling throughout your facility and damaging sensitive equipment. Provides cascade protection, when used with service entrance protection. Includes audible alarm and remote monitoring. Stock No. Mfr.'s Type Phoenix No. Description EACH 909-0635 909-0636 909-0637 2804063 2803904 2804018 VAL-SQ SP 120-277/470Y/FM VAL-SQ SP 120-120/208Y/FM VAL-SQ SP 120-120/240S/FM Surge Protection for 277/480 VAC Wye, 3-Phase Surge Protection for 120/208 VAC Wye, 3-Phase Surge Protection for 120/240 VAC Split-Phase 1250.00 1250.00 1250.00 Control Cabinet Surge Protection Prevents surges from damaging sensitive equipment controlling critical processes. The protection can be mounted externally to the cabinet or internally on the DIN rail. Available in single- and 3-phase. 16 Stock No. Mfr.'s Type Phoenix No. Description EACH 909-0638 909-0343 2803881 2859453 VAL-SQ CC 40-120/208 VAL-CP-3S-175 660.00 301.79 909-0639 909-0349 2803991 2859482 VAL-SQ CC 40-120/240S VAL-CP-2C-175 809-0633 2856812 PT2-PE/S-120AC 909-0217 2858357 PT2-PE/S-230AC Surge Protection for 120/208 VAC Wye, 3-Phase -- Externally Mounted Surge Protection for 120/208 VAC Wye, 3-Phase -- DIN Rail Mounted -- Hot Swappable Plus Remote Monitoring Surge Protection for 120/240 VAC, Split-Phase -- DIN Rail Mounted -- Externally Mounted Surge Protection for 120/240 VAC, Split-Phase -- DIN Rail Mounted -- Hot Swappable Plus Remote Monitoring Surge Protection for 120 VAC, Single-Phase -- DIN Rail Mounted -- Hot Swappable Plus Remote Monitoring Surge Protection fro 230 VAC, Single-Phase -- DIN Rail Mounted -- Hot Swappable Plus Remote Monitoring 1324 2804063 660.00 167.93 119.76 121.54 2803881 DATASHEET AC Power Surge Protection